Sale!
Rated 5.00 out of 5 based on 32 customer ratings
(32 customer reviews)
$26.99 – $103.49
2-3 Day Handling
FDA CERTIFIED FOOD GRADE SAFE EPOXY
– Our Superclear® Table Top Epoxy has been independently tested and FDA certified as a food grade safe product once completely cured, according to FDA 21 CFR 175.300, ASTM D-4236!
SEAMLESS COLOR INTEGRATION
– Our table top epoxy can be colored with Supercolors Pigments, pigment powder, mica powder, most alcohol inks, resin dyes, and resin tints!
THE ULTIMATE BAR TOP EPOXY
– Superclear® epoxy is self-leveling, easy to clean, scratch, water and chemical resistant, and cures crystal clear for the highest super gloss finish available!
MADE IN THE USA
– Fiberglass Coatings, Inc. is based out of Saint Petersburg, FL and has been in business for over 60 years! We are proud to say we are made 100% in the USA!
-
SKU: N/ACategories: Epoxies, Table Top Epoxy
- Description
- Directions
- FAQs
- Disclaimer
- Additional information
- Reviews (32)
- FAQ
Description
The Ultimate Table Top Epoxy
Superclear® Table Top Epoxy is the clearest epoxy resin countertop kit you will find on the market, and is the best epoxy resin for sealcoats, DIY bar tops, epoxy resin table top repairs, epoxy resin wood art, & much more. We offer 1 pint, 2 quart, 1 gallon, and 2 gallon kit sizes.
Easily calculate your epoxy pour volume with our Epoxy Resin Calculators!
Read more about Table Top Epoxy on our blog!
STEP 1:
Best results can be obtained at temperatures between 70°F and 84°F depending on volume and thickness poured, in a clean, dry, dust-free environment. Avoid working in high humidity. We recommend using this product on a leveled and flat work surface. Keep in mind, the more volume you plan to mix, the lower you will want to be on the temp scale we provided above.
PRO TIP:
Due to this product being mass sensitive, the warmer the environment, the shorter working time you will have, which is why we recommend mixing a maximum of 2 quarts, of total volume, at a time at 74F. If you are in a warmer environment mixing over 2 quarts, your working time will be severely restricted. After mixing, promptly pour it onto your surface. If your project requires more, once you spread the mass out by pouring onto your surface, you will have plenty of time to mix up another batch!
STEP 2:
Prepare 1 part Base Resin to 1 part Curing Agent by liquid volume or 100 parts Base Resin to 83 parts Curing Agent by weight. Pour the Curing Agent first and then the Base Resin into a clean, smooth sided container large enough to hold all the liquid and allow room for mixing. We do not recommend mixing more than a half-gallon in a single container, as this product is mass sensitive.
STEP 3:
The material must be mixed thoroughly for a minimum of 3 minutes and maximum of 5 minutes. Once the material becomes crystal clear, you should be ready to pour. Be sure to scrape the container sides, bottom, and corners as you mix for the first 3 minutes, and after 3 minutes do not scrape the bottom and sides. Be careful to not whip excessive air into the mixture and stir like you would hot tea.
STEP 4:
Pour the mixed resin onto the surface and distribute evenly with a squeegee, ¼” notched trowel or gloved hand. Continue to pour remaining material to achieve the desired thickness, (up to 1/4”) allowing the resin to flow evenly over the project’s sides. Wipe the sides with a gloved hand to evenly distribute the material on the sides and get rid of the drip lines.
STEP 5:
If you are going to make a second pour, the first pour should still be slightly sticky. This can generally range between 2-6 hours after your initial pour. What you are looking for is what we like to call “bar-room-floor-after-college-beer-night” kind of tacky. Once the second pour is made, bubbles may once again need to be removed. Material will feel well-cured after 24 hours, but full cure and maximum hardness can require up to 7 days depending upon the temperature.
HOW LONG DO I HAVE TO MIX IT?
– You need to stir it by hand for a minimum of 3 minutes and a maximum of 5 minutes, scraping the sides and bottom thoroughly throughout the first 3 minutes, and stirring regularly during the last 2 minutes. When pouring, we do not recommend scraping the sides as doing so may introduce unmixed material into your pour, thus leaving you with soft and tacky spots when cured. Doing so can risk mixing in unmixed, unincorporated epoxy into your pour, thus creating curing issues.
HOW THICK CAN I POUR IT?
– Due to the thicker viscosity of our product, you can pour up to 1/4” thick per pour, depending on ambient temperature and total mass. Much thicker than most competitors! The mass for a 1/4” pour varies depending on temperatures and conditions. If you have never poured as thick as 1/4”, we suggest you try it on a smaller scale to understand how it will cure in your particular environment.
CAN I ADD ANOTHER LAYER TO THE SURFACE?
– Yes! Simply wait until the pour is tacky and nearly hard and pour your next layer. If the product is already hard, lightly sand with 220-320 grit sandpaper and wipe it down with Isopropyl Alcohol 90% or higher before adding additional layers, which creates a mechanical bond between the two layers.
HOW LONG DOES IT TAKE TO CURE?
– The product will begin to harden within the first 1-1.5 hours, in ideal conditions, but takes up to or around 24 hours to completely cure, depending upon conditions like constant temperature, humidity, mass and airflow.
IT’S COLD AND THE EPOXY IS REALLY THICK, WHAT DO I DO?
– Under 65 degrees, our epoxy may start to thicken up. You may see some crystallization. Don’t worry, the epoxy is fine! Before mixing, bring a pot of water up to a steady 75-80 degrees, and then put each bottle of epoxy in there until they come up to temp between 75-80 per bottle. Do not mix first and then bring up to temp. Once the epoxy is up to temp, let it cool back down to around 70-75F before beginning the mixing process. The cooler your temperatures are, the longer it will take to cure. If too cold, the chemical process of curing will not take effect, and if left too long in that state, may never react and start the curing process. The hotter the environment, the faster it will cure. The same can be said of volume. More volume will cure quicker, and less can take longer.
While our product can be used in a variety of applications, not all users or environments are the same. As such, specific directions for all individual users might not be addressed in the directions. If there are any questions that our directions do not answer, pertaining to the individual customer’s application, it is the customer’s sole responsibility to contact us directly with any technical questions and procedures prior to the application of the product. See below for various means to obtain further information and or contact us directly; we offer FAQs on our website and technical service via Email or phone Monday through Friday, 9am-4pm EST.
For more product information, please visit:
www.SuperEpoxySystems.com
(888) 849-0588
superclear@fgci.com
Temperature : Volume & Depth Info
Always pour in a temperature controlled environment. Ideal working temperatures are 70°F to 84°F, but this is dependent on the total volume and depth of the project. The greater the volume or thickness of the pour, the lower your temperatures should be.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Shelf Life | Unopened: 6 – 12 months* *depending upon how the product is stored. |
32 reviews for Superclear® Table Top Epoxy 1:1
Rated 5 out of 5
julie guyette (verified owner) –
superclear tabletop & liquid glass are my go to resins for my small business because it’s food contact safe and so easy to use. i’ve tried the major brands and they just don’t perform as well as superclear.
Rated 5 out of 5
Michele (verified owner) –
See AlsoThe 2 Places to Refill Rapid Fill Mugs at Disney's Contemporary & Bay Lake Tower (1)Gramm-zu-Gallonen-Rechner - Rechner WowLove the tabletop epoxy for my many projects and custom orders!
Rated 5 out of 5
hyesun corba (verified owner) –
I have used variety of brands of epoxies, but Superclear Tabletop’s quality is the best and that I can rely on 1000% for every project!!!
Rated 5 out of 5
Sherrie Baxa (verified owner) –
I’ve tried many different epoxies and Superclear Epoxy Resin is by far the easiest to work with, best results and clearest of them all! I’m a crafter and sell my creations, so I’m very particular about what products I use and am looking for the best quality at a reasonable cost. Superclear is the only product I will use for my business!
Rated 5 out of 5
Susan (verified owner) –
I love Table Top Liquid Glass 2.0. I have tried many different Epoxies and I have found this has the perfect working time for the professional, the clearity is awesome, and I can get bubbles out easily (I don’t have a pressure pot). By far the cost effective as well
Rated 5 out of 5
Jon Blumenthal (verified owner) –
This produces some great results for my art. Cures quick and is easy to work with
Rated 5 out of 5
Jon Blumenthal (verified owner) –
Updating to include picture. Love the results that this produces for my artwork.
Rated 5 out of 5
Roger J Trotter (verified owner) –
I use Super Clear table top epoxy for all that I make. I make wall hangings, bottle openers, TV trays, and coasters. Colors are easy to mix into the epoxy and are nice a bright when dry. The clear coat comes out really nice a clear does not yellow like other epoxies. I have used other epoxies and this is the best one out there.
Rated 5 out of 5
Amanda (verified owner) –
My go to epoxy! I love this brand! I have used numerous brands in the past and this is my steady go to! I highly recommend this product for any topcoat or thin pour needs! For deep pour super clean is my number one as well! Pictures to come!
Rated 5 out of 5
Michael Weaks (verified owner) –
Excellent product, easy to measure and mix. Sufficient work time and quick cure time.
Rated 5 out of 5
Craig T –
I’ve gone through 20+ gallons of this brand between Deep Pour 2-4″ and Table Top, and it delivers every time! Looking forward to trying the new 1″ pour. It’s perfect for DIYer or professional use.
Rated 5 out of 5
Kirk –
I love this product. I’ve tried other brands and none of them compare to Superclear. 99.9% bubble free, then with a little heat gun, all out.
Rated 5 out of 5
Michael Shep –
I’ve used several different brands and find that superclear is by far the best epoxyI’ve used. It’s easy, dries much faster than the others and always comes out clear and beautiful. I know what I’m going to be using from now on.
Rated 5 out of 5
Bonnie Keane (verified owner) –
I’m Worry free using the superclear tabletop. Contains HALS and UV protection for controlling yellowing. Easy to mix. I only wish the working time was more. Great product and can back that up by saying I have been using it for years.
Rated 5 out of 5
Brandon Mahoney –
Incredible products all around. First time epoxy user and the staff helped me each step of the way. The table top came out perfect and no bubbles!
Rated 5 out of 5
Matthew Lauer –
Awesome product! Table turned out great.
Rated 5 out of 5
Chadwick Kelton (verified owner) –
I have been using superclear for over a year now and am totally happy with the product. I continue to recommend their products and use them exclusively.
Rated 5 out of 5
Breanna Gillespie –
Love this resin! I use it on birchwood panels or in molds to make artwork. It’s the best!
Rated 5 out of 5
Hannah D. (verified owner) –
I only use SuperClear and recommend it to everyone. It’s super easy to work with, bubble free. Just the best for that perfect finish.
Rated 5 out of 5
Kiersten ketcham (verified owner) –
I’ve tried many brands in search of the right one, and super clear is my favorite by far. The best clarity with no amber hue, and the most longevity of that clearness. I’m am and always will be a loyal super clear customer!
Rated 5 out of 5
Melanie Thompson (verified owner) –
This is my favorite epoxy to use. Cures solid, and if directions are followed, minimal bubbles. Ive never had any problems with it, no uncured spots and it is very durable. Love it. Only epoxy I use.
Rated 5 out of 5
Chris Valiquette (verified owner) –
Like others, I’ve tried a few different brands, but I always seem to come back to SuperClear. Never has an issue with this stuff and it always sets perfectly with great clarity.
Rated 5 out of 5
Kat Breitbarth (verified owner) –
Only kind of epoxy I use! It is great, cures fast and has great clarity. Great for jewelry pieces, trinket boxes, and bigger trays. Might have to attempt a table at some point! This stuff is my favorite!
Rated 5 out of 5
Cheryl Campbell (verified owner) –
I have used SuperClear products for a year and couldn’t be happier with the results. Table Top Epoxy is my “go to” for the tables I sell, a hard and durable surface after creating tables with SuperClear Deep Pour. Crystal clear, no problems with bubbles.
Rated 5 out of 5
Erin –
This is the gold standard! Strong, reliable, no odor, blends like a dream! I’ve never had any issues with Super Clear! My absolute favorite!
Rated 5 out of 5
Kevin Morris (verified owner) –
I have just started learning how to work with epoxy resin. I listened to so many others talk about what a great product Table Top 1:1 is and how crystal clear it cures. I was not disappointed! This stuff is amazing and I am hooked! I really see no other reason to try any other brands. Thanks for making such an amazing product!!
Rated 5 out of 5
Debbie Mulherin –
We typically use the deep pour products but have used the table top epoxy for several projects. Would have to say it’s nearly goof proof if the ratios and temperatures are correct. No bubbles in the end products! Love all their products!
Rated 5 out of 5
Tammy (verified owner) –
Love the super clear epoxy. Easy to work with.
Rated 5 out of 5
Rachel B Wu (verified owner) –
I use this for my top coats and rest ready knowing it will not yellow like some other brands out there. Just buy it!!
Rated 5 out of 5
Amber Hulsey –
I have been using the tabletop epoxy for alot of projects. I absolutely love it!!!! Super easy to work with and has a very low oder. Will buy more soon!!!
Rated 5 out of 5
Michelle Pfaffendorf (verified owner) –
I love using this epoxy for my tumblers!
Rated 5 out of 5
TKTops –
When I first started using EPOXY I used so many brands & non can compare to Super Clear! The flow, the consistency, the customer service, the quality!!! Everything is 10/10. If you’re reading this & unsure. Buy it!! You won’t regret it
Add a review
Submitted Successfully
We will respond soon
Returning customer? Click here to login
Have a coupon? Click here to enter your code
